Uniscaff EngineersUniscaff Engineers

Home

About Us

Tube Scaffolding & Fittings

H-Frame Scaffolding

Multi Purpose Scaffolding

Formwork System (For RCC Wall)

Formwork System (For Curved RCC Wall)

Wedgelock Systems

Adjustable Props

Adjuster Panel

Flexible Panel

Wall Form

Beam Spans

Centering Sheet

Scaffolding & Shuttering System

We use cutting edge technology to design and fabricate varied range of steel, copper and brass pipe drawing related machines. We endeavor to comply with customers' specifications and also strive to offer products that are as per international standard.

Our gamut of industrial equipment includes:
Tube Scaffolding & Fittings

Tube Scaffolding & Fittings

We provide the following types of scaffolding & fittings :

  • Double Coupler: For connecting 40 mm N.B tubes at a right angle.
  • Swivel Coupler:Used to connect 40 mm N.B. pipes at any angle.
  • Expanding Joint Pin: Suitable to connect 40 mm NB Pipes as Ledgers.
  • Fixed Base Plate: Suitable for 40 mm nominal bore steel tubes.
  • Adjustable Stirrup Head: Designed for fine adjustment of height between 80 mm and 200 mm.
H-Frame Scaffolding

H-Frame Scaffolding

We offer a wide range of H-frame scaffolding that is manufactured `in accordance with the changing dynamics of the market. Innovated to meet the growing expectations of our clients, these possess following features and specifications:
 
  • Welding frames of two verticles of 2 mt (32 mm. N.B. Pipe)
  • Two horizontals of 1.22 mt (25 mm N.B. Pipe)
  • Frames are inter-connected with bracing at an interval of either 2 mt or 2.5 mt through pins welded on frame and locked suitably
Multi Purpose Scaffolding

Multi Purpose Scaffolding

We offer a wide range of multi purpose scaffolding that has been fabricated using superior quality raw material. Customized as per the specifications of our clients, these cater to wide requirements of our clients spread across the globe and possess following features:
 
  • Consist of two verticles and one lintel from 40 mm N.B. Medium tubes
  • Lugs welded at 450 mm
  • Intervals on verticles to provide support to lintel
  • Lintels are provided with three ways clamps at both the ends to fix horizontal / ledger tubes to connect the units
  • Offered in the normal size of 6' x 4'

Advantages:
 
  • No fire hazards
  • Can be used repetitively
  • Handy and easy for erection at great heights
  • Termite / insect-proof
  • Long term economy
Formwork System (For RCC Wall)

Formwork System (For RCC Wall)

We have carved a niche in the market by offering a precision engineered range of Formwork System for RCC Wall. These are available in customized as welle as standard sizes and are of two types:
  1. For simple RCC wall and
  2. For round RCC Wall
 
For Simple RCC Wall :
 
  • Steel system shuttering
  • Standard panels made out of 45 x 30 x 5 mm / 45 x 45 x 5 mm
  • Angles suitably slotted with 50 mm
  • Intervals, skin plate of 2.5mm
  • Thick M.S. Sheet welded to the frame of wall form/channel soldier, internal corner panels

Formwork System (For Curved RCC Wall)

Formwork System (For Curved RCC Wall)

Our range of formwork system for curved RCC wall has been meticulously fabricated under the supervision of our team of experts. These are fabricated using superior quality raw material and are provided with wailing tubes that can be curved to suit the requirements of our clients.

For Curved RCC Wall :

  • Waling tubes will be curved to suit required configuration.

Wedgelock Systems

Wedgelock Systems

Designed and developed in accordance with the needs of our clients, our wide range of wdgelock systems finds varied application in wide number of industries. These are qualitatively superior and can be customized as per the specifications of our clients.
 
Some features and specifications of our systems are:
 
  • Consist of vertical built of 40 mm. N.B.
  • Heavy pipes with wedge housings welded at intervals of 500 mm / 100 mm in four directions at right angles
  • Angular transom tubular ledger, tubular bracing having end fittings with locking wedges will fit into the wedge housing with hammer
  • Maintenance free
  • Available in standard sizes
 
Upright / Vertical
 
2 meter, 3 meter
 
Tubular ledger
2 meter, 2.5 meter
 
Angular Tubular transom
 
1.25 meters
Adjustable Props

Adjustable Props

Manufactured as per the latest trends of the industry, our range of Adjustable Props is widely in demand in the market. Qualitatively superior, these are available in various types such as:
  
Type
UP1
UP2
UP3
UP4
Height in meters
closed position
1.75
2.00
2.00
3.00
Height in meters
open position
3.12
3.35
3.75
4.75
Safe vertical
load at closed position (kgs)
3200
3300
2900
2300
Safe vertical
load at open position(kgs)
2300
2200
2000
1150

 Some of the specifications and features of these props are as follows:
 
  • Consist of one outer tube  (50 mm.N.B medium or heavy)  threaded  with malleable nut .
  • Inner Tubes made out of  (40 mm.N.B.medium or heavy)
  • Easy to handle
  • Provide fine adjustment in heights. 
Adjuster Panel

Adjuster Panel

Adopting latest technological development, we have been able to fabricate a wide range of Internal Corner / External Corner / Channel Soldier / Wall Adjuster panel. These are customized as per the specifications of our clients and comply with various international standards.
Flexible Panel

Flexible Panel

We are engaged in manufacturing a wide range of Flexible Panel that are widely used in various industries. These are available in various standard sizes and can be customized a as per the specifications of our clients.
 
Sizes that can be availed from us are:

  • 1250 x 500, 1250 x 400

Internal Corner Panel Size
1250 x 150 x 150 mm
External Corner Panel Size
1250 mm, 2500 mm long
Channel Soldier
Size 1250 x 100 mm


2500 mm x 100 mm
Wall adjuster panel size
1250 x 150


1250 x 225


1250 x 350

Wall Form

Wall Form

We are one of the leading manufacturers of Wall Form that can be customized as per the specifications of our clients. These are developed in compliance with various industrial standards and are available in standard sizes such as
 
  • 1250 mm / 2500mm long
  • Width: 300, 350, 400, 450, 500, 600
Beam Spans

Beam Spans

We fabricate a wide range of Telescopic Beam Spans that are widely in demand in the market. Manufactured in compliance with the latest industrial standards, these consist of an outer and an inner member of varying lengths and are offered in various sizes such as:

Type Combination Minimum Span meters Maximum Span meters
ISOS Inner Short / Outer Short 1.80 3.00
ISOM Inner Short/ Outer Medium 2.40 3.60
IMOM Inner Medium / Outer Medium 2.40 4.20
ILOM Inner Long / Outer Medium 3.00 4.80
ILOL Inner Long / Outer Long 3.00 5.40
Centering Sheet

Centering Sheet

We offer a wide range of Centering Sheet/Floor Form that are manufactured with 2 mm. sheets which has been folded on all four side with suitable slot provided with stiffener. There are present adjuster which are used for filling up odd shape of slabs. These are available in standard sizes of:

  • 900 x 600
  • 1150 x 600
  • 800x 600 mm.

The Adjusters are also available in various sizes such as:

  • 1150 x 400 / 250
  • 900 x 400 / 250
  • 800 x 400 / 250
  • 600 x 400 / 250 mm

What We Offer

Copyright Uniscaff Engineers, All Rights Reserved